Super Purchasing for The series of Har-2480 GZM flexible chain to Turkmenistan Importers

Working load:170(N)

The material of the Har-2480 TMD and Har-2480GZM and Har-2490 HXC generally are POM. The biggest advantage is that all of them can competent with whether the horizontal or the vertical rapid turns and friction and noise are small .The characters are easily installation and maintenance and high mechanical strength as well s excellent product handling. Besides, this kind of products are widely used in n food, soft drinks, packaging and can manufacturing, tobacco, medicine and chemical industry, electronics, automobiles and logistics, etc .In addition, as long as you give our the drawing and detailed specifications, All-Ka has the products to suit any customer application.

Read below for Full Product Specification.. Available for Export Worldwide…

Australian manufactured and designed to suit Australian tuff working conditions

. Max Capacity: 1.5m³ + cubic metre on site
.Travel Capacity: 1.3m³ cubic meter
. Brakes: 4 wheel electric brake suspension
. Tow Hitch: Choice of Pintle Hook / 70mm Ball type
. Honda GX390 electric start engine
. Total GVM: 4500kg
. Dry Weight: 1,680 KGS
. Tare: 2760kg ( Payload of the unit )
. Concrete load mix capacity of 1.5m³ + cubic Meters on site
. Conveyor load width 2500mm or ( ( 98.2” Inches or 8.2ft feet )
. Mixer Bowl capacity (1.5m³ cubic metre or Yard 1.65′ )
______________________________

Trailer Specifications:

. Honda 13hp Horsepower Electric start power plant
. Mixing Bowl, 4mm heavy duty plate rolled Bisalloy steel.
. Compliance to meet ADR standards Australia
. 3000 NM Planetary heavy duty gear Box.
. Separate bidirectional hydraulic motor @ 22 RPM
. Top hydraulic conveyor batching feeder x 30RPM
. 60 Litre on board water tank with 12v pump
. 12v / 35 PSI water pump for wash down / hand nozzle
. Fully welded RHS steel
. Long draw bar for easy reversing
. Integrated double fold guards with fill-in stone guards and mud flaps.
. LED trail lights, recessed, reflectors, brakes and compliance plate- to ADR standards
. Tail, brake, indicator and number plate lights.
. Dual ‘underslung 50mm axle’ and 16” flotation tyre’s
. 16” x 7” Steel rims / 235-75R 16 LT6PM tyre’s.
. 6 stud Land Cruiser hub pattern.
. Electric Brakes with Brake Safe.
. Roller-Rocker. Load Sharing Suspension.
. Heavy duty Japanese Bearings
. Rear pump plate for safety.
. Large 8” jockey wheel.
. All wiring is 12 volt with 7 pin flat trailer plug.
. Heavy duty front and rear stabilizing legs.
. Conveyor load width 2500mm or ( ( 98.2” Inches or 8.2ft feet )
. Mixer Bowl capacity (1.5m³ cubic metre or Yard 1.65′ )
. Australian manufactured and designed to suit Australian tuff working conditions.

______________________________

The CMX-1500 Mini Mix concrete batching mixing trailers are your solution to providing quick and easy quality concrete. The self-contained batching plant can be easily loaded by a Skid Steer / Wheel loader, Backhoe or even a Excavator allowing the overhead conveyor belt to do all the work of delivering material directly into the mixing bowl with no manual labor. (Overhead conveyor can be manufactured to specific length of up to 2500mm wide ) ( 98.2” Inches or 8.2feet )

Features include self-loading hopper system a hydraulic rotation bowl and hydraulic tilt for mixing and dumping. (Mix whilst traveling) Large internal mixing blades and simple to use rear operator control panel. The CMX-1500 Mini mixer is fitted with a high end Honda GX390 electric start 13hp petrol engine with full electric start. 60 Litre on board water tank with 12v pump

The CMX-1500 Mini Mix can be towed behind most small trucks or any heavy duty utility vehicle with a 4.5t towing capacity that uses electric brakes. This allows the trailer to be towed with a 1.3m³ cubic metre load, maximum capacity on road and onsite batching and mixing is 1.5m³ cubic metre when not in transit. The CMX- 1500 is a invaluable and convenient solutions machine for remote locations difficult and hard job sites where conventional delivery systems do not work. Ideal for Concrete contractors that have a need for small to medium batch mixers at a fraction of the cost. Ideal machine for the smart Concrete contractor but also suitable for large fencing contractors landscapers, swimming pool installers, builders, D.I.Y hire customers to numerous agriculture applications. The biggest advantage is that Concrete can be mixed in remote locations at a fraction of the cost compared to current delivered ready-mix systems.

There is also a opportunity for rental companies to utilize these units within their hire fleets with maximum returns, small country towns and local councils that have difficulties with access to concrete batching plants or just require the convenience to mix onsite to minimize costs.

Full set up with turn key operation and is your work ready Cart-Away concrete batch plant. All units are Australian manufactured and are designed to ship and pack into a 20ft and 40ft containers fully assembled. We usually have units in stock and are available for sale Australia wide to include exports to the Cocos Islands / Fiji / New Zealand / PNG / Solomon Islands / Nauru / Guam / Maldives / Vanuatu / Hawaii / USA / United Kingdom.

YOU MIX – YOU CART – YOU SAVE…

* Registered Product design approved.
* Patent pending on design / numerous functions to include conveyor loading system.

Visit www.southerntool.com.au
Email [email protected]
Call us 07 3363 8999