Personlized Products The Har-1610 of multiflex conveyor chains for Barbados Manufacturers

Pitch:82.5(mm)

Thickness:48(mm)

Working load:3000(N)

The material of the Multiflex conveyor chains are POM and all of them have a transport direction of flexibility, low coefficient of friction and has long lifetime. The characters of the products are easily installation and maintenance and high mechanical strength as well as excellent product handling. Besides, All-Ka Multiflex conveyor chains normally in food cans, glass products, milk cartons, as well as the bread conveying. The different type can be available as your requirement, thus as long as you give me the drawing or detailed specification, everything is okay. So All-Ka has the products to suit any customer requirement.

https://www.specialprojects.com/equipment/3976/

S.J. Industries model 5 20 stainless steel can warmer. Tunnel is 13.5″ high x 60″ wide x 240″ long with plastic mesh belting. Designed with 120° F , 130° F and 140° F heating zones. Belt is driven by 1 hp motor with variable speed Eurodrive. Has a 7.5 hp, 6 x 6 x 9 pump for water spray. Has a 1.5 hp, 3 x 3 x 6 pump for drainage. Overall dimensions are 68″ high x 78″ wide x 240″ long plus 18″ wide infeed and outfeed conveyor frames attached. Feed height of 41.5″. Serial # 400100012. Requires 240 vac 3 phase electrical, 65 psi steam and 85 psi water supplies.

As a competent system supplier for chassis and frame construction, laser cutting, sheet machining and stainless steel processing, MBH Maschinenbau & Blechtechnik GmbH relies on the latest production technologies, quality and productivity. A highlight is the new robot system of Carl Cloos Schweisstechnik GmbH from Haiger which allows to weld complex components with different sizes. The system controls two independent, programmable welding robots which can weld simultaneously on a single subassembly in single-station mode, but in two-station mode can also process different, smaller subassemblies completely independently. The turn/tilt positioner always positions the complex workpiece perfectly for welding. Thus positions which are difficult to access can be reached and an optimum weld quality is achieved. The torch changing system allows using single wire and tandem process with a single robot. The entire welding process is designed so that welding times and ancillary activities are of the same duration This is how MBH achieves an optimum degree of utilisation of the system and efficient use of personnel which makes production quick and attractively priced.