OEM/ODM Factory for Har H610-3 Guard Rail for Latvia Factories

Short Description:

Product Detail

Product Tags

Feedback (2)

As a way to present you with ease and enlarge our enterprise, we also have inspectors in QC Staff and assure you our best company and product for Conveyor Lift , Narrow Belt Conveyor , Hdpe Wear Strip , We'll offer most effective top quality, quite possibly the most sector aggressive value, for each new and old customers with all the most excellent green services.

OEM/ODM Factory for Har H610-3 Guard Rail for Latvia Factories Detail:

Product detail pictures:

We believe in: Innovation is our soul and spirit. Good quality is our life. Shopper need to have is our God for OEM/ODM Factory for Har H610-3 Guard Rail for Latvia Factories, The product will supply to all over the world, such as: Djibouti, Bangladesh, Mexico, After years of development, now we have formed strong ability in new product development and strict quality control system to ensure excellent quality and service. With the support of many long term cooperated customers, our solutions are welcomed all over the world.

The decommissioned Reclaimer was relocated to a dedicated demolition area, away from any live plant. The machine was pulled from its stockyard, over a bridge and away from the live conveyor line. The machine was transported to a further designated area for demolition and processing.

Prior to moving the structure, Liberty Industrial disconnected and extracted the impact table from underneath the Reclaimer while it was in the stockyard, without damage to the conveyor belt. Once disconnected from all its services, the 1250t structure was pulled over purposely built extension rails to a temporary position where the machine underwent all preparatory works required for its transport using Self-Propelled Modular Trailers.

To pick-up and secure the Reclaimer in position during transport, a special-purpose 40t steel “transport frame” was fabricated and mounted on the bed of the SPMT trailers. Once lowered to the ground and secured, the structure was pre-weakened to facilitate its demolition with explosive cutting charges. The charges were placed at strategic locations and the pre-weakening cuts verified by our consulting structural engineer. After the structure had been safely collapsed to ground level, a combination of 70t & 36t excavators fitted with shear attachments processed the steel structure for removal and recycling off site.

EZSplice makes joining your Flat-Flex® Wire Belt simple, and creates stronger, longer lasting belt joints.