Hot New Products The series of Har-881 TABFH Antic-Slip steel table top chain for Netherlands Factories
Hot New Products The series of Har-881 TABFH Antic-Slip steel table top chain for Netherlands Factories Detail:
Pitch:38.1 (mm)
Shaft diameter:7.05 (mm)
Working load:4000 (N)
Har-881 belongs to the straight plate chain and the biggest character of Har-811TABFH is that it has the function of antic-slip, it can avoid the movement of the product in the transport. the material of the products are stainless, It can achieve continuous working and intermit tented operation. The characters about the product are easily installation and maintenance and high mechanical strength as well as excellent product handling. Besides, our products are widely used in a variety of glass bottles, and metal objects transport heavy loads over long distance, the most suitable transportation is all kind of alcohol. The detailed size can be available as your requirement, thus as long as you give me the drawing or detailed specification, everything is okay. So All-Ka has the products to suit any customer requirement.
Product detail pictures:
As for aggressive charges, we believe that you will be searching far and wide for anything that can beat us. We could state with absolute certainty that for such excellent at such costs we've been the lowest around for Hot New Products The series of Har-881 TABFH Antic-Slip steel table top chain for Netherlands Factories, The product will supply to all over the world, such as: Milan, Turkey, Barbados, We put the product quality and customer's benefits to the first place. Our experienced salesmen supply prompt and efficient service. Quality control group make sure the best quality. We believe quality comes from detail. If you have demand, allow us to work together to get success.
Bunting® Magnetics Co. has developed an innovative new design for its Magnetic Cross-Belt conveyor product line. This new design features structural enhancements, an improved magnetic deep-reach circuit and tramp metal deflector shields that increase the protection of the belt.
Whether you are recycling plastic, tire & rubber, wood, metals or e-scrap, these materials can be very abrasive on the belt and can easily get under the belt and onto the face of the magnet which can cause havoc, stated Don Suderman, Bunting® Product Manager for Material Handling. Our new design features UHMW wings that extend over the bottom side edges of the belt to protect it from tramp metal tears.
Also, this new wing design seals the edge of the belt and keeps tramp metal from snapping to the side of the conveyor frame or getting under the belt. This protection against material getting under the belt reduces any hindrance to the operation of the conveyor. As additional protection, Bunting® has further surrounded the magnet being used with a heavy-box stainless steel frame.
Within any recycling facility, our Cross-Belt Conveyors will make a large impact on the efficiency of the operation in that facility, Suderman stated. Our new magnetic circuit provides maximum separation effectiveness of tramp metal for municipal recycling and higher product purity in a shredding recycling operation.
For more information on the Bunting® Magnetic Cross-Belt Conveyors, visit www.crossbeltconveyors.com. For information on the full Material Handling product line, visit the companys web site at www.buntingmagnetics.com. For more information, write Bunting® Magnetics Co., 500 S. Spencer Avenue, PO Box 468, Newton, KS 67114-0468; call 1-800-835-2526 (US & Canada) or 1-316-284-2020; or send e-mail to [email protected].
Brought to you by Process Plant Network
Address: 3-5 Capital Drive, Dandenong, VIC 3175, Australia.
Email: [email protected]
Websites: www.processplant.com
www.iopak.com
By Anne from Madrid - 2016.05.02 11:33
It can be said that this is a best producer we encountered in China in this industry, we feel lucky to work with so excellent manufacturer.
By Katherine from Suriname - 2015.12.25 12:43