High reputation for The series of Har-2000 multiflex conveyor chains to Pakistan Manufacturers

Pitch:38.1(mm)

Shaft Thickness:25.0(mm)

Working load:150(N)

The material of the Har-2300,Har-2310 and Har-2310 LH and Har-2310 RH are POM and all of them have a transport direction of flexibility, low coefficient of friction and has long lifetime. The characters of the products are easily installation and maintenance and high mechanical strength as well as excellent product handling. Besides, All-Ka Multiflex conveyor chains normally in food cans, glass products, milk cartons, as well as the bread conveying. The different type can be available as your requirement, thus as long as you give me the drawing or detailed specification, everything is okay. So All-Ka has the products to suit any customer requirement.

C/U of electric light bulbs moving slowly along on a conveyor belt at the Osram factory in Wembley, Middlesex. C/Us of tungsten (metal) powder being measured out and weighed, then a man shakes it into a mould and spreads it out evenly. M/S as he takes a metal bar and presses down on the powder, then puts the whole mould into an oven-type machine and pulls a grill down over it – this is the press. C/Us of the bars after pressing (or ‘sintering’), then the furnace door as a tungsten bar is inserted and a heated one is pulled out.

C/Us as heated bar is put into the swaging hammers machine (it heats and hammers the bars on all sides); a red hot one is pulled out, rotated and reinserted. Various M/Ss and C/Us as the bars go through swaging machines; the process makes the bars thinner and thinner – C/U of the bar coming through a machine having been stretched to a long, very thin filament wire, and being coiled around a drum. C/Us of the filament components being rolled out by hand ready to be fed into the machine. High angle M/S of the filament assembly machine; a woman operator feeds components into it.

M/S and C/U of a part of the machine that seals the base of the filament, panning right to show holes being blown in the base of the filament section. M/Ss of the bulbs being washed from the inside and over the shoulder of a woman operator as she puts the filaments in place to be picked up by the machine. C/U of the filaments being placed in position by the machine, panning right to show the bulbs being placed over the filaments. M/S of the woman standing at the machine then C/U of bulbs spinning round with excess glass at the base being burned off.

M/S over the shoulders of two women as they fix the bases to the bulbs and stick them on a revolving turntable. C/U of a woman’s hands attaching the bases as bulbs and bases pass before her on two separate conveyor belts. M/S of a woman testing the finished bulbs by screwing them onto a conveyor belt where they light up.

Note: print used for transfer is quite badly scratched; neg does not contain full issue. There is documentation on file – technical notes on making of light bulbs.
FILM ID:101.32

A VIDEO FROM BRITISH PATHÉ. EXPLORE OUR ONLINE CHANNEL, BRITISH PATHÉ TV. IT’S FULL OF GREAT DOCUMENTARIES, FASCINATING INTERVIEWS, AND CLASSIC MOVIES. https://www.britishpathe.tv/

FOR LICENSING ENQUIRIES VISIT https://www.britishpathe.com/

(Roll forming: https://youtu.be/k6iODHla6qY)

This film takes you through the processes within a hot rolling mill. You’ll get to see the different stages all the way from heating to cooling.
Filmed at SSAB in Borlänge, Sweden (https://www.ssab.com)

For more information about courses visit our website https://du.se/en/Education/Subject-list/Material-Science/

Watch this film about Roll forming to find out what can be done with the finished strips! https://youtu.be/k6iODHla6qY