High definition wholesale Har AJM-24T Comb Plate to Lithuania Manufacturer

This Cyberjet C-14 pick and place conveyor washer has a 360-loop table top conveyor belt. Camshafts are robotically placed on special fixtures. The length of the part is in direction of travel; working width is only 6″. The fixture is designed for tight turns around the loop. The washer discharges to a position where a robot picks up a camshaft and goes to a roll-scan machine. The 3-stage system includes wash, dry and oil misting. All wetted parts are stainless steel.

PRF – PLASTICS RECYCLING FACILITIES
www.amutecotech.it

AMUT plant is able to cover the comprehensive recycling flow from mixed plastics sorting up to the delivery of flakes. These flakes have a quality level suitable to be re-used in further extrusion, injection or thermoforming process.
The plant reclaims polyolefin thermoplastics scraps to be transformed into granules with an output of 10 Tons/h.
The thermoplastic scraps come from the urban and industrial separate collection and they are previously selected as:
- HDPE / PP containers and bottles for foods.
- HDPE / PP containers and bottles for detergents and chemicals.
Plastics at inlet: HDPE and PP (75%), heavy plastics (25%).

The plant is fed by mixed plastics materials packed into bales, loaded by a forklift on the extracting chain conveyor installed in a pit, weighing system equipped with, and then conveyed to the “bales breaker machine”, properly designed and manufactured to break up bales mainly composed by plastic materials. This machine doesn’t shred material but gets back bulk material in order to feed the recovery plant in a constant and regular way.

Breaking up of the bales is assured by the circular motion of a drum equipped with fix teeth. The rotor’s sharp tools enter the bales separating in this way all materials that fall in the below conveyor belt, conveying materials to the pre-sorting picking cabin where pickers take way bulky materials, mainly represented by cardboard and film, from the stream. After this first selection, by a feeding conveyor, the material flow is conveyed in the rotary trommel, where the separation depends on size. Three different streams are possible.
1. Material having size smaller than 30 mm falls on a conveyor belt, where is conveyed, jointly to the one fine coming from the ballistic separators, to the residue storing unit.
2. Material having size between 30 and 260 mm, is conveyed to the ballistic separator where the rolling shape and the hard materials are separated from the light and flat ones by the paddles sussultory movement. Furthermore, thanks to the grids installed on the paddles, fine material not yet separated by the rotary trommel, is evacuated and conveyed to the special storing unit. Flat and light material are conveyed upward by a conveyor.
“Rolling shape and hard materials” sorted by the action of the ballistic separator, are conveyed to the plastics automatic selection line where plastic material will be automatically selected by optical readers.
3. Oversize materials stream, having size bigger than 260 mm is conveyed to the bulky materials picking line, where, different types of materials, mainly film and good plastics to be sent to the automatic line are manually selected and discharged in chutes.

In order to get the higher quality of materials, after the NIR optical reader they are provided QC (quality control) stations, where pickers recycle errors, conveyed at the beginning of the automatic line to get more efficient the line. A manual checking line is also provided.
Before entering the automatic line, “rolling shape and hard material” (plastic materials stream) stream passes through a de-metallization line, consisting of an over band magnetic separator used for ferrous materials and, an Eddy Current System (based on the Foucaults currents principle), used for no-ferrous metals. Ferrous and no-ferrous materials selected in the de-metallization line, are weighed by weighing system hopper and then discharged into hook-lift containers.