Good Wholesale Vendors Non-powered Tapered Roller for United Arab emirates Importers

This type of Commutator Hot-stacking Machine is applied to fuse the armature commutator hook. It has cooling system to cool down the commutator after its fusing process. It is controlled by PCL, all the data setting can be done on the touch screen. It can weld both riser and hook type commutator. There are four power control method, namely secondary constant current, secondary constant voltage secondary constant frequency. This machine can automatically fuse, and operator only need to load and unload rotor.

(2) Main technical data:
Feeding method: automatic feeding. Loading and unloading
Parameter setting: touch screen and power parameter setting
Power control method: current feedback, high precision countercurrent
Commutator type: both hook type and raise type
Wire diameter: 0.1mm-1.2mm
Armature OD. φ10mm-φ50mm
Shaft OD: φ5mm-φ15mm
Commutator O.D.: φ15mm-φ40mm
Commutator slot/hook number: ≤36
Current range: 0.5-50KA
Voltage range: 0.1-9.99V
Power range: 1.00-99.99KW
Power control method: secondary constant current, secondary constant voltage secondary constant frequency
Welding standard parameter range (1-63groups)
Electric parameter testing setting range: current: 00.00-99.99KA(0.01KA per unit), voltage: 00.00- 99.99V(0.01V per unit), Frequency: 00.00-99.99KW(0.01KW per unit)
Cooling method: water cooling
Air source: 4kg/cm2—6kg/cm2
Power supply: three phase AC380V±10% , 50HZ 40KW
Machine weight: 800kg

Contact person: Effy( [email protected])
Web: www.nide-group.com www.nide-auto.com