Good User Reputation for Modular Belts P=2″ Belt Har 200 flush grid for Puerto Rico Importers

Har 200 flush grid     

Thickness: 9.8mm     

Opening area: 33%

Our company passes ISO9001:2000 quality system. We use standard POM material so that our products have some advantages as follows:
1. Easy installation
2. Good plastic rubber material, best service
3. resistant to corrosion and friction
4. Wear resistant
5. High quality and most competitive price
Our products are mainly used in the following aspects:
For the container manufacturing industry special products and materials are available, such as abrasion resistant polyamide for glass plants, vacuum chains for can making and gripper chains for vertical transport.
For food industry applications modular belts and components are used in deboning, grading and trimming lines for meat, poultry and seafood. A wide range of products is also offered for blanchers, cookers, washers, coolers and processing lines in fruit, vegetables, bakery, confectionary etc. And many more products are available for the handling of packed food.
In automotive industry the products are engineered to meet the most demanding applications, such as rubber processing and tire handling. 

COOLING CONVEYOR

Lintas Artha Engineering Belting yang memungkinkan udara bersirkulasi secara bebas sekitar dan di bawah part, adalah sebuah cara yang baik untuk meningkatkan pendinginan. Belting bisa digunakan sendiri atau dengan alat bantu pendingin seperti udara ruang yang ditiupkan atau udara yang didinginkan. Pilihan meliputi modular belt, wire mesh belting. Jika anda perlu mendinginkan sebuah ekstrusi atau part dengan cepat, sebuah semprotan air bisa menjadi pilihan yang baik. Aplikasi ini menggunakan tiga sprayer air untuk menyemportkan kabut halus air ke ekstrusi panas ketika melaluinya. Aliran air yang melalui sebuah wire mesh belt, kedalam stainless steel pan di bawahnya. Untuk mengijinkan ekstrusi dikemas dengan segera, dua pisau udara menghilangkan air residual.

A. Water Cooling

Lintas Artha Engineering water cooling conveyor adalah sebuah cara yang baik untuk mendinginkan part berdinding tebal ketika mereka dipindah ke konveyor yang lain atau stasiun kerja yang lain. Conveyor kustom, flat to incline dan tanki penahan air memberikan landing halus dan pendinginan maksimum. Unit tersedia dalam banyak pilihan panjang dan lebar.

Submersible conveyor ini memiliki cover dengan sebuah silinder diaktivasikan, pintu tergantung pada ujung in feed. Pada sebuah sinyal, dengan sebuah robot (atau device yang lain), in feed door terbuka, part diijinkan masuk air, kemudian pintu menutup, menahan part ini di bawah air ketika in tank conveyor memindahkannya ke bagian condong dari konveyor ini. Pintu membuka kembali untuk part selanjutnya. Sebuah opsi indexing juga tersedia. Spesifikasi tanki dan konveyor sama sebagaimana yang tercatat di bawah ini untuk standard submersible conveyor.

B. Blowing ambient air

Meniupkan udara ruan pada part panas bisa menjadi cara yang relatif murah untuk membantu mendinginkan part yang hangat pada jalan mereka ke operasi packing atau assembly. Ruang pendingin bisa ditempatkan pada flat conveyor atau incline conveyor. Indexing pada conveyor belt bisa membantu memaksimalkan waktu dalam ruang pendinginan. Blower bisa dalam kecepatan yang berubah atau tetap.

C. Chilled air cooling

Pendinginan udara dingin adalah pilihan yang baik ketika part-part perlu didinginkan secara menyeluruh. Unit pendingin udara dingin standard meliputi sebuah blower dan coil yang dipasang di tutup pada conveyor belt. Air dingin diberikan oleh chiler pelanggan atau tower. Ruang pendinginan bisa ditempatkan pada flat converyor atau incline conveyor. Indexing conveyor belt bisa membantu untuk memaksimalkan waktu dalam ruang pendinginan. Blower bisa dalam kecepatan yang berubah atau tetap. Sedangkan unit pendingin udara dingin membutuhkan akses ke chiller atau tower untuk air dingin, unit mandiri tidak membutuhkan apapun selain outlet 100V. Unit mandiri bisa memberikan pndinginan cepat, pendinginan post mold sampai serendah 40 sampai 45 derajat F. (tergantung pada udara plant ruang dan suhu part). Set up sederhana tidak membutuhkan pipa ledeng.

CV.LINTAS ARTHA ENGINEERING

GENERAL CONTRACTOR , MANUFACTURE, COMMISIONING

Design,Installation, Food Service Equitment, AC ,Comercial & Industrial Refrigeration, Cold room,Block ice, Lubricant Distributor, Steel&Building Contraction, Etc YOUR TOTAL PARTNER SOLUTION Head Office : Jalan Perusahaan No. 37 C Dsn. Losawi, RT 004/006 Ds. Tunjung Tirto Kec. Singosari Malang FB : Indomesin Website : www.indomesin.co.id dan www.indoniaga.co.id HP : Telp. (0341) – 8194777 | Telkomsel 0822 4558 2777 | XL 087 8594 888 11 | Mentari 0857 9163 2999

Video showing how to fit two production lines and two print and apply labellers into a very narrow production area.

The Codeology P100 Printer Applicator is the first of a new generation of print and apply labellers.

Further details can be found at https://www.codeology.com/print_and_apply

The P100 is British designed and built, predominantly of stainless steel and aluminium, it has been designed for today’s demanding 24/7 factory.

Nobody can afford downtime these days, so we have designed the P100 to keep your lines running at peak efficiency. High reliability, easy setup and modular components ensure that you get the most out of the P100 with minimal intervention. The design team have over 30 man years experience of labelling and they are confident you won’t find a better value for money or more reliable labeller on the market. Since its launch in 2005 the P100 has proved to be robust, reliable, eays to use and simple to maintain in both chilled and ambient factories all over Britain.

New for 2010 Ethernet is now fitted as standard to all P100 printers. Using our iBar software it has never been easier to control all of your printers from one point, making label design and selection easier than ever.

Why is it good for my production department?

The P100 has been designed and built with your operators in mind. It only has two controls to keep operator training simple. Height adjustment uses a gas strut for ‘zero gravity’ effect so even the smallest operators can move it easily.

The entire system has been built for maximum reliability – we have one customer who spent less than £25 on spares for their first P100 in the first year. If it does require maintenance then the modular design means any part can be replaced in minutes, having you up and running with minimum downtime.

Main Features

- 300mm diameter label roll capacity to hold as many labels as possible and minimise changeovers.
- Narrow footprint of only 343mm from conveyor keeps the P100 out of the way of operators and sack trucks.
- Fast – can print and apply up to 50 100 x 150mm labels per minute.
- Effective label path design allows slow print but fast application ensuring best quality with maximum throughput.
- Easy to adjust the reach of the P100 so ensuring simple and quick changeover for different carton sizes.
- Integral alarm beacon visible from any direction to alert operators when label or ribbon needs changing
- Handles any label size from 50 x 25 up 100 x 300mm without changing anything on the machine
- Works with Direct Thermal and Thermal Transfer labels and wax, resin or economy ribbons as standard.
- Available stand-alone or with an integral conveyor for ‘wheel in and go’ installation
- Both side-only and side-and-end (wrap-around) label application is possible with one machine

What will my engineers think of it?

We believe your engineers will be pleased that you chose the P100. Engineers tend to like it because our design team includes service and maintenance engineers and it is obvious that we have incorporated features to make a maintenance engineer’s life easier for example:

- Robust Stainless Steel and Anodised Aluminium construction as standard so no rust.
- modular design with four screw fixing means you can exchange any module in minutes.
- Plastic bearings throughout gives long life and no lubrication.
- Sealed for life conveyor motors mean no maintenance.
- All parts are within the envelope of the machine so no protruding arms to damage.
- Peeler plate and motor assembly can be rotated and reach adjusted to allow simple integration into existing machinery.
- Feedback display with simple diagnostics to aid fault-finding.
- Simple display to keep the operators informed of machine status.
- Non-contact air knife system for side-and-end labelling has no moving parts to fail.

Further details are available on our web site at https://www.codeology.com/print_and_apply

What variants are available?

- Machines are available stand-alone to fit your conveyor or with an integral conveyor system.
- Integrated conveyors can be tailored to your requirements (height, width etc)
- Side-only or side-and-end labelling options.
- Stands are available for angled conveyors (up to 28 degrees)
- Special height and reach machines can be provided
- Print engines as standard are from Datamax but we can accommodate Sato, Intermec or Zebra engines if you prefer.
- We write our own label design and control software, iBar, which can be modified by our own programmers for special applications or to interface to your process control systems.
- Industrial computers for local control can be supplied. The one in the picture (right) is totally stainless steel with stainless vandal-proof keyboard (touch screen options are available). Further details of the computer are at https://www.codeology.com/ipc.html.