Factory selling Modular Belts P=0.75″ Belt Har 5936 flush grid baffle to Germany Factory

Har 5936 flush grid baffle     

Thickness: 8.5mm     

Height of baffle: 20mm 30mm 50mm

It is easy to clean and can resist heat because of good plastic rubber material. The modular belts plus baffle can prevent the products from falling when conveying. We are a leading manufacturer of modular belts with professional team; we can provide you with excellent quality items. This kind of modular belt can be used in the following industries:

Beverage industry such as acceleration, depletive and accumulation.
Food industry such as cool off lines and pack lines.
Meat industry such as tray pack line and metal detectors.

It is mainly used in food, soft drink, packaging & manufacturing, tobacco, medicine & chemical, electronics, automobiles and logistics industries. It can also be used in meat poultry applications including packaging lines, making/filling lines and accumulation tables. What is more, widely used in such machinery industries as alcoholic and beverage, food & cold food, tobacco, (pillow-type) packaging, chemicals, pharmacy, cosmetic, bottle-making, jar-making, post & telecommunication, and painting engineering.

https://intralox.com/tire-and-rubber.aspx
For over twenty years, tire manufacturers around the world have used Intralox belts in tire transport applications, from millroom to final finish. Intralox tire solutions have proven to be strong, durable, easy to maintain, and simple to operate.

With the release of the patented Series 900 Open Flush Grid belt, Intralox has upgraded its time-tested conveying solution for tire cooling lines to deliver an increased open area and longer wear life. The new, innovative belt design offers numerous advantages to the tire cooling process:
• Increased throughput via more efficient cooling
• Increased belt life and lower cost of ownership
• Reduced scheduled and unscheduled maintenance
• Fewer rods required in inventory

Intralox is a global provider of conveying solutions. https://www.intralox.com/home.aspx

The pasteurizer and/or cooler is an automatic machine ideal for pasteurizing and/or cooling products packaged beforehand in glass, plastic and tinplate containers of various shapes and sizes. The most suitable products for this type of treatment are: tomato puree, pickles preserved in vinegar or oil, jam, fruit preserve, soft drinks, beer, fruit juice and any product with a pH below 4.5.

The pasteurizer consists in a robust structure made of bent AISI 304 stainless tubular and sheet steel. It is divided into various tanks to create the required heat cycle. Every machine area can be inspected thanks to hatches on the side flank as well as covers on the top. The infeed conveyor belt continuously and automatically loads the containers inside the machine. The polypropylene belt used to transport the containers through the tunnel slides over idle rollers made of AISI 304 stainless steel to reduce friction and to reduce the amount of wear to the belt.
The programmed heat cycle in each tank (to heat and/or cool the container), is created by a shower of water spray issued through special sprayers located on the top part of the machine. Once the water has wetted the containers, it is collected in a side tank where it is filtered and then returned to the high flow rate sprayers by a centrifugal motor-driven pump, ready to repeat the heat cycle again. The outfeed conveyor belt is equipped with a pneumatic aligner. It automatically and continuously unloads the containers form the machine.
The drying station installed on the outfeed conveyor belt eliminates any excess water from the surface of the container. When the heat cycle requires heated water, the water is heated by a coil made of AISI 304 stainless steel, which is filled with steam and immerged in the relative tank. The belt used to convey the containers is driven by an inverter driven gearmotor.
The infeed and outfeed conveyor belts are driven independently by two variable speed motors. The control board, made of AISI 304 stainless steel, houses all machine control and command devices.
basic data of YX series Oil crease packing machine bags into cooling pasteurization tunnel real shot in plant túnel de enfriamiento:
Production cappacity 1-5T/H
Sterilizing temperature no more than 98°C
Sterilizing time 10-35 minute speed infinitive adjusting
Cooling temperature 5-°C
Cooling time 10-25 minute speed infinitive adjusting
Steam pressure 0.4Mpa
Link belt time 0.17-10m minute speed infinitive adjusting
Centrifuge blower fan 3kw
Compete weight About6000kg
Outline size 1600×2600×2000mm
For more information about the various machines filling packing equipments like YX series Oil crease packing machine bags into cooling pasteurization tunnel real shot in plant túnel de enfriamiento from our superb cosmetic machinery factory,plz browse our another website business video https://youtube.com/user/mrjackdu007 as well as follow PENGLAI INDUSTRIAL CORP business website https://penglaichina.com