Factory Promotional The series of Har-882 TABF plastic slat top chains to Comoros Factories
Factory Promotional The series of Har-882 TABF plastic slat top chains to Comoros Factories Detail:
Pitch:38.1(mm)
Thickness:27(mm)
Working load:2350(N)
Har-882, Har-882 TAB and Har-882 TAB and Har-882 PRR-TAB belongs to the turn top chains. The material of All-Ka chain products are POM. They can achieve change the orientation in the process of operation. Besides, The series of Har -882 plastic slat top chains also can easily installation and maintenance and it has high mechanical strength. In addition, our products are widely used in food, beverage, pet bottles and aluminum cans as well as all kinds of containers transport. The detailed size can be available as your requirement, thus as long as you give me the drawing or detailed specification, everything is okay. So All-Ka has the products to suit any customer requirement.
Product detail pictures:
The buyer pleasure is our primary concentrate on. We uphold a consistent level of professionalism, excellent, credibility and service for Factory Promotional The series of Har-882 TABF plastic slat top chains to Comoros Factories, The product will supply to all over the world, such as: Rwanda, Macau, Senegal, We aim to build a famous brand which can influence a certain group of people and light up the whole world. We want our staff to realize self-reliance, then achieve financial freedom, lastly obtain time and spiritual freedom. We do not focus on how much fortune we can make, instead we aim to obtain high reputation and be recognized for our items. As a result, our happiness comes from our clients satisfaction rather than how much money we earn. Ours team will do best in your case always.
https://www.how-to-repair.com/help/repair-guides/washing-machines/heating-systems-washing-machines/
washing machine not heating, We are going to show you how to fit the new element and thermostat to this Bosch, Neff or Siemens washing machine this process should be pretty similar to your make and model of front loading machine.
Safety first disconnect your washing machine from the power supply and it’s a good idea to turn the washing machine water supply of,
1. Remove two screws from back of the top panel. These are normally torx head screws and you can get a full set of these torques bits in our tool section.
2. Take out the soap dispenser draw by pressing the button on top.
3. Remove front panel after removing screws, do keep these screws separate because they’re stainless steel.
4. Remove the kick strip and pump flap normally one screw.
5. Remove this retaining clip which is holding the door seal against the machine. There are lots of different ways that these retaining clips work, see video.
6. Remove screws that are now holding the front panel of machine on.
7. Remove door interlock, two screws.
8. Peel back door seal after taking the retaining clip of. See video
9. The element is situated at the bottom of the drum. Take photo of the wiring before disconnecting it.
10. Just uncouple the wires attached to the thermostat. Usually block connector.
11. Undo this nut which is attached to the retaining clip, with a spanner or a socket. Don’t undo it all the way because you have to tap the nut in, to release the pressure on the seal, then with a flat bade screw driver prise the washing machine heater element away from the outer tube. Be careful with this
12. The thermostat is a push fit into the element
13. If you need to check if the element has blown you will need to use a multi-meter to test it.
14. Replace which part is need and reverse this procedure
By Doris from Tanzania - 2016.06.16 18:23
Adhering to the business principle of mutual benefits, we have a happy and successful transaction, we think we will be the best business partner.
By Althea from Atlanta - 2015.08.12 12:27