Chinese Professional Har-821/802 Driven Machining without Teeth Supply to Boston
Chinese Professional Har-821/802 Driven Machining without Teeth Supply to Boston Detail:
Product detail pictures:
To regularly increase the management program by virtue of your rule of "sincerely, good faith and quality are the base of business development", we extensively absorb the essence of associated solutions internationally, and continuously create new solutions to satisfy the demands of customers for Chinese Professional Har-821/802 Driven Machining without Teeth Supply to Boston, The product will supply to all over the world, such as: Latvia, Spain, Dominica, We are adhering to the philosophy of "attracting customers with the best solutions and excellent service". We welcome customers, business associations and friends from all parts of the world to contact us and seek cooperation for mutual benefits.
Online auction at:
https://www.netbid.com/en/auctions/detail-overview/13950342-/
Net EXW startprice: 460 000 EUR
Auction end: 15/11/2013 – 11:00
This paint shop allows you to perform the following process steps: – Prepare the objects for painting in 5-zone washing line, along with automatic drying.
- Flashed off parts with compressed air
- Activation of the surface by flaming burner
- Deionization of the parts prior to painting
- Pneumatic spray of primer paint
- Partial drying – before the next step painting
- Spraying of base paint with electrostatic – pneumatic spray
- Partial drying – before the next step painting
- Spraying of clear coat with electrostatic – pneumatic spray
- Drying the objects at temperature up to 90 ° C
In the process of painting can be used both: solvent-based paints as well as water paints.
They can be painted objects made of: plastic, wood, metal and other materials.
Spray cabins are air-conditioned by equipment Eisenmann and Heck, which result in air parameters in the range of 18-25 °C and 55-70% humidity.
Air filtering is accomplished by:
- Water jacket situated under the floor, working in closed circulation between painting cabins and wastewater treatment plant. In the wastewater treatment plant is the process of coagulation remnants of paint, allowing for the mechanical removal them from the water cycle.
- 4-gradual filters from G6 to F16 in units Eisenmann
- Ceiling filters in spray cabins
- Part of contaminated air is directed to the thermal-catalytic afterburner Eisenmann
This paint shop has operated around 8000 hours
Painting shop consists of:
1. Multi zone washer, man. 1997, dimensions 2,2 x 27,8 m, 5 spraying zones with pumps and stainless steel tanks
2. Water treatment plant, make Protech,
3. Initial dryer for drying after washing, man. 1997, dimensions 6,2 x 27,8 m, equipped with gas heating oven, gas consumption 30 m3/h, two air circulation fans with a capacity of 33 thousand m3 / h
4. Chain conveyor, man. 1997, length 200 m, overhead chain conveyor with pendants for buffers transport
5. Spray cabins with the control system and fire protection system, man. 1997, modernization made in 2008 by Asis, surface activation cabin (dimensions 5 x 13 m), ground cabin (dimensions 6 x 15,8 m), base coat cabin (dimensions 6 x 19 m), clearcoat cabin (dimensions 6 x 15,8 m), cotrol system ASIS, fire protection system
6. Airlock, man. 1997, 20 air jets
7. Basic dryer for drying after painting, man. 1997, dimensions 7,7 x 53 m, equipped with two gas heating ovens, gas consumption 2 x 45 m3/hour, 4 air circulation fans with a capacity of 39 thousand m3/h
8. Ventilation system with humidification, make Eisenmann, man. 2008, air efficiency 27 thous. m3/h, fan power 18,5 kW, heating: natural gas, heating power 625 kW, temperature control, humidity control
9. Closed circuit ventilation room for the cabin of priming paints, make Eisenmann, man. 2008, efficiency of the exhaust air 42,5 thous. m3/h, cooling power 150 kW, heating power 90 kW, heating / cooling: refrigerant, fan power 55 kW, 5 filtration stages
10. Closed circuit ventilation room for the cabin of basecoat, make Eisenmann, man. 2008, efficiency of the exhaust air 60,5 thous. m3/h, cooling power 215 kW, heating power 125 kW, heating / cooling: refrigerant, fan power 90 kW, 5 filtration stages
11. Closed circuit ventilation room for the cabin of clearcoat, make Eisenmann, man. 2008, efficiency of the exhaust air 44,5 thous. m3/h, cooling power 160 kW, heating power 90 kW, heating / cooling: refrigerant, fan power 55 kW, 5 filtration stages
12. Flaming robot, make Fanuc, type P-250 E R-J3iB, with Asis application, man. 2008 Robot designed to activate the surface of plastic parts before painting by firing with flame fed by natural gas.
13. 3 robots for pneumatic painting, make Fanuc, type P-250 E R-J3iB, atomizer Industra, paint application Asis, man. 2008
14. 3 robots for electrostatic painting, make Fanuc, type P-250 E R-J3iB, instrumentation Sames, atomizer High rotation Bell Electrostatic, paint application Asis, man. 2008
19. Regenerative Thermal Oxidation, make Eisenmann, type 5300, man. 2008, height 11.2 m x 5,3 m diameter, airflow: 27000 m3 / h, reaction temperature: 800-850 ° C, power of burners: 360kW, temperature of the purified gas: 80 ° C,
20. Floor conveyor, make Asis, man. 2008, length 420 m, 132 trolleys for transport, max weight of the parts is 11kg, max. dimensions of the parts are: length: 2.0 m, height: 1.6 m, width: 0.6 m Conveyor speed can be adjusted, max 4 m/min
21. Water pumps in cleaning plant, 6 pumps with filters
22. Paints mixing installation, make ABB, man. 1997, 15 thermostatic tanks with pumps and filtration system which capacity 200 liters each.
By Pag from Antigua and Barbuda - 2016.05.21 12:31
This manufacturer can keep improving and perfecting products and service, it is in line with the rules of market competition, a competitive company.
By Megan from Philadelphia - 2015.06.09 12:42
