12 Years Factory wholesale L Industrial Belt for Nepal Factories

Collar type Auger filling machine
The CTAPP Machine is vertical electro-pneumatic packaging machine. This machine automatically forms a pouch, fills it with a product and then seals and then separates the “filled and sealed Pouch”. The CTAPP Machine is suitable for all kinds of free flow powder Products. This machine can be synchronized with Auger filling system and can pack up to 1 kg. Of products in centre sealed pouches. It uses a single roll of packing film The Machine is fitted with Collar Type Former Pipe unit that; convert flat packing film into vertically sealed tube; which is ultimately converted in to filled & sealed pouches. Horizontal Sealers act like opening & closing jaws to carry out horizontal sealing.

Ancillary & Optional Equipment
1. Pneumatic Gusseting Device
2. Filled Pouch Conveyer (Take off Conveyor)
3. D punching Unit
4. Hopper level sensor device (Minimum Material Level Sensor Device)

Technical specifications
Collar type pouch packing (CTAPP) machine, fitted with auger filler are used to pack Sticky, non flowing and fine powders like, Milk Powder, Maida, Gram Flour, Wheat Flour, Coffee Powder, Powdered Spices, Chili Powder, Turmeric Powder, Maize Flour, Pharmaceutical Powders etc.
Packing Film Any Heat Sealable Laminate
Product Application Non Free flow & Free Flow Powder products
Roll Width Depend to your requirements
Pouch Size Depend to products
Sealing Type Center Seal or 3Side sealing
Dozing System Servo base Auger filling system
Drive 1 HP AC Drive (Schneider Make)
Body Type MS with Powder coating
Machine Covering Type Fully SS-304 or M.S with powder coated
Operating systems 7.5” HMI-PLC (Delta make)
Temperature Controller PID Type (Multispan or Select make)
Film draw mechanism Servo base or Clutch & brake motor
Volt Meter / AMP. Meter PID (Multispan or Select make)
Power Supply / Relay Omron make
Pneumatic components Festo Make OR Janatics Make
Paper controller Attach Unbinding motor & sensor
Contact Parts Food Grande Stainless Steel SS 202/304 (According to requirements)
Electrical MCB & Switches ABB Make, Schneider Make & L&T Make
Compressed Air 6 CFM @ 6 Bar (Depending On Attachments )
Power Consumption 3.5 kW
Safety Feature Sensor Base Door Heater Indicator
Electrical Supply 220 V /AC / Single Phase / 50 HZ OR 440 V /AC Three Phase /50 Hz
Machine weight 900Kg. Approx

SAMPACK INDIA PVT LTD,
COCHIN-682035
PH:0484-2382211,4030212,
MOB:+91 9447111444,
www.packingmachinekerala.com,
E-mail:[email protected]

(Note: Packaged product in this video is for demonstration purposes only.) This single stainless steel constructed, pneumatic controlled sanitary quick release tool-less belt conveyor for transporting temperature controlled raw meat product at a volume of more than 50,000 lbs per hour. The conveyor has a retractable idle and drive end with a center take-up. The retractable idle end operates with a customer supplied metal detector to reject product at the infeed. The retractable drive end operates in two positions to dispense into either of two hoppers positioned at the discharge. A customer supplied check weigher triggers the divert to move from one side or the other based on weight for continuous processing. A manually adjustable belt scraper w/catch pan scrapes off excess product that does not fall into the totes. Sanitary specifications included a mill finish with electro-polish. All welds had to be continuous, free of pits, cracks and crevices. The retractable noser frame itself is completely removable for cleaning and maintenance. The controls are located in an offset sanitary enclosure. Electrical components are mounted in a single NEMA 4X stainless steel slope top enclosure.

Learn more at https://www.multi-conveyor.com/