10 Years Manufacturer Small Pitch Modular Belt Conveyor for Brasilia Factories

Our modular belt conveyors are based on the product and its size and weight. Besides straight sections, we also offer curve conveyors and incline conveyors. The modular belt conveyor construction is inexpensive, simple, quiet, and easy to install. Modular Belt conveyors are also used where smooth or high coefficient of friction is needed on the conveying surface. They offer smooth product handling and a solid base to transport.

Advantages of the Hairise modular belt conveyors

• compact design, and thus they can be optimally integrated in existing systems
• Grooves can be used to fasten attachment parts, such as stands, side rails or proximity switches
• Profile design ensures a torsion-resistant structure with good carrying characteristics
• Large selection of belt types

1. Straiht run modular belt conveyor Har900

Modular belt conveyors are widely used for food industry applications and for products with high temperatures to 110°C.  Due to the guide of the belt, lateral deviation does not occur, thus workpieces can also be pushed off transversely. Due to its positive-fit drive, the straight run conveyor can handle high loads, even at narrow belt widths.

Dimensions – Technical Data

• Conveyor width B: 193 to 3000 mm (in 152 mm increments)
• Conveyor length: Custom from 1000-300000 mm
• Total load: up to 10000kg
• Drive & speed: to v = 30 m/min
• Drive versions: AC, AS

2.Curved modular belt conveyor

The modular belt conveyor Har2400 is available with several track layout curve angles of 45°, 90°. 180° or 360°. Using individual variations, the track layout can be perfectly tailored to the existing conditions. The different conveyor widths ranging from 249mm up to 3000 mm and offer a very good effective width ratio, which is of advantage in confined spaces on site. In addition, the system is modular in structure and in combination with straight and incline conveyors practically all track layouts can be implemented in three-dimensional space.

Dimensions – Technical Data

• Conveyor width: 249mm to 3000mm
• Conveyor length: custom from 1000-30000 mm
• Total load: up to 10000kg
• Drive & speed: to v = 30 m/min
• Drive versions: AC, AF

3.Incline modular belt conveyor 

Our Har7800 conveyor is used to transport sea food, wet fish or other food products. Various belt materials allow use at high temperatures to 110°C. Cleaning of the modular belt is easy and fast, consequently this belt conveyor is often used in the food industry.

Dimensions – Technical Data

• Conveyor width B: 152mm to 1500 mm (in 76 mm increments)
• Conveyor length L1+L2+L3: up to 10000 mm
• Belt bend: 30, 45 and 60°
• Total load: up to 3000 kg
• Drive & speed: to v = 30 m/min
• Drive versions: AC, AF

This video features a walk around of our tight radius wire mesh 90 degree conveyor. It is capable of inside turning radius of 0.8:1 (i.e. a 36″ wide chain has inside turning radius of 29″) which ranks among the tightest in the industry.

https://www.aaronequipment.com/usedequipment/conveyors/screw-conveyors/44801052
Used- Conveyor Engineering Screw Conveyor, 304 Stainless Steel. Approximately 6″ diameter x 24″ long. Driven by a 1/2hp, 3/60/230/460 volt, 3600 rpm gear motor.